Search for: All records

Dynamically controlling friction in micro- and nanoscale devices is possible using applied electrical bias between contacting surfaces, but this can also induce unwanted reactions which can affect device performance. External electric fields provide a way around this limitation by removing the need to apply bias directly between the contacting surfaces. 2D materials are promising candidates for this approach as their properties can be easily tuned by electric fields and they can be straightforwardly used as surface coatings. This work investigates the friction between single layer graphene and an atomic force microscope tip under the influence of external electric fields. While the primary effect in most systems is electrostatically controllable adhesion, graphene in contact with semiconducting tips exhibits a regime of unexpectedly enhanced and highly tunable friction. The origins of this phenomenon are discussed in the context of fundamental frictional dissipation mechanisms considering stick slip behavior, electron-phonon coupling and viscous electronic flow.

 

Charged double network (DN) hydrogels are widely studied for their desirable mechanical strength and tunable properties. In this work, the influence of polymer concentration on microstructure and properties of agarose/polyacrylic acid DN hydrogels is studied. Agarose, the first network, is a brittle biopolymer, while polyacrylic acid (PAAc) is a weak polyelectrolyte. The microstructure, visualized in liquid environment, displays an agarose scaffold coated and interconnected by PAAc, deviating from the common assumption of an entangled double network. Importantly, the charging of PAAc in the hydrogel is regulated not only by the pH and weak polyelectrolyte effects, but also by the restricted swelling of the double network, and hence, it is an inherent regulation mechanism of charged hydrogels. The interactions between the hydrogel and the ionic environment induce microstructural changes and charging of the double network, impacting surface properties such as topography, stiffness, and adhesion, which are spatially resolved by liquid‐environment atomic force microscopy. The responsiveness of the DN hydrogels significantly depends on both polymer concentrations and ion concentrations. These findings provide insights into the responsive behavior of double network hydrogels and reveal universal mechanisms for charged hydrogels, which can guide the future development of functional soft materials.

 

Interactions between molecules in the synovial fluid and the cartilage surface may play a vital role in the formation of adsorbed films that contribute to the low friction of cartilage boundary lubrication. Osteoarthritis (OA) is the most common degenerative joint disease. Previous studies have shown that in OA-diseased joints, hyaluronan (HA) not only breaks down resulting in a much lower molecular weight (MW), but also its concentration is reduced ten times. Here, we have investigated the structural changes of lipid-HA complexes as a function of HA concentration and MW to simulate the physiologically relevant conditions that exist in healthy and diseased joints. Small angle neutron scattering and dynamic light scattering were used to determine the structure of HA-lipid vesicles in bulk solution, while a combination of atomic force microscopy and quartz crystal microbalance was applied to study their assembly on a gold surface. We infer a significant influence of both MW and HA concentrations on the structure of HA-lipid complexes in bulk and assembled on a gold surface. Our results suggest that low MW HA cannot form an amorphous layer on the gold surface, which is expected to negatively impact the mechanical integrity and longevity of the boundary layer and could contribute to the increased wear of the cartilage that has been reported in joints diseased with OA. 

Although earthquakes are one of the most notorious natural disasters, a full understanding of the underlying mechanisms is still lacking. Here, nanoscale friction measurements were performed by atomic force microscopy (AFM) on calcite single crystals with an oxidized silicon tip to investigate the influence of roughness, contact aging, and dry vs. aqueous environment. In dry environments, smooth and rough calcite surfaces yielding single- and multiasperity contacts, respectively, exhibit velocity-weakening ( β D ln V ) or neutral friction at slow sliding velocities and velocity-strengthening friction ( α D ln V ) at higher velocities, while the transition shifts to slower velocities with an increase in roughness. The origin of the velocity-weakening friction is determined to be contact aging resulting from atomic attrition of the crystalline surface. Friction measurements in aqueous environment show evidence of pressure solution at sufficiently slow sliding velocities, which not only significantly reduces friction on single-and multiasperity contacts but also, eliminates atomic attrition and thereby, velocity-weakening friction. Importantly, the friction scaling law evolves from logarithmic ( β D ln V ) into linear ( α P S V ), deviating from commonly accepted rate-and-state friction (RSF) laws; this behavior extends over a wider range of velocities with higher roughness. Above a transition velocity, the scaling law remains logarithmic ( α W ln V ). The friction rate parameters α D , β D , α P S , and α W decrease with load and depend on roughness in a nonmonotonic fashion, like the adhesion, suggesting the relevance of the contact area. The results also reveal that parameters and memory distance differ in dry and aqueous environments, with implications for the understanding of mechanisms underlying RSF laws and fault stability. 

Soft materials are usually defined as materials made of mesoscopic entities, often self-organised, sensitive to thermal fluctuations and to weak perturbations. Archetypal examples are colloids, polymers, amphiphiles, liquid crystals, foams. The importance of soft materials in everyday commodity products, as well as in technological applications, is enormous, and controlling or improving their properties is the focus of many efforts. From a fundamental perspective, the possibility of manipulating soft material properties, by tuning interactions between constituents and by applying external perturbations, gives rise to an almost unlimited variety in physical properties. Together with the relative ease to observe and characterise them, this renders soft matter systems powerful model systems to investigate statistical physics phenomena, many of them relevant as well to hard condensed matter systems. Understanding the emerging properties from mesoscale constituents still poses enormous challenges, which have stimulated a wealth of new experimental approaches, including the synthesis of new systems with, e.g. tailored self-assembling properties, or novel experimental techniques in imaging, scattering or rheology. Theoretical and numerical methods, and coarse-grained models, have become central to predict physical properties of soft materials, while computational approaches that also use machine learning tools are playing a progressively major role in many investigations. This Roadmap intends to give a broad overview of recent and possible future activities in the field of soft materials, with experts covering various developments and challenges in material synthesis and characterisation, instrumental, simulation and theoretical methods as well as general concepts. 

Despite recent advances in polyelectrolyte systems, designing responsive hydrogel interfaces to meet application requirements still proves challenging. Here, semicrystalline colloidal gels composed of poly(methacrylamide‐co‐methacrylic acid) are investigated in water with storage moduli in the MPa range. A combination of SEM, X‐ray scattering, and NMR reveals the evolution of the colloidal microstructure, crystallinity, and hydrogen bonding with varying monomer ratio. The gels with the finest colloidal microstructure exhibit the most dissipative rheological behavior and are selected for the study of their interfacial characteristics and underlying interactions. Microstructure stabilization and dynamics results from short‐range (attractive) hydrogen bonding and hydrophobic forces, and long‐range (repulsive) electrostatic interactions—the “SALR” pair potential. Further, the gel's surface exhibits a submicron colloidal topography that greatly determines (colloidal‐like) friction as a result of the viscoelastic deformation of the colloidal network, while electrostatic near‐surface interactions propagate in lamellar adhesion. The dynamic and reversible nature of the involved interactions introduces a stimulus responsive behavior that enables the electrotunability of adhesion and friction. This study advances the knowledge necessary to design complex hydrogel interfaces that enable spatial and dynamic control of surface properties, which is of relevance for applications in biomedical devices, soft tissue design, soft robotics, and other engineered tribosystems.